RedMax PSZ2450S Betreibershandbuch

US-1PSZ2450SUSOWNER'S/OPERATOR'SMANUALPOLE SAW848-A59-93A0 (909)PSZ2450SWARNINGThe engine exhaust from thisproduct contains chemicalsknown t

US-10PSZ2450S7. Fuel and Chain Oil FUEL • Gasoline is very flammable. Avoid smoking or bringing anyflame or sparks near fuel. Make sure to stop the e

US-11PSZ2450SUS7. Fuel and Chain Oiltest standard has been discontinued by API in 1995 and it nolonger exists.• Gasoline/Oil mixture Storage Recommend

US-12PSZ2450S8. Operation STARTING ENGINEThe cutting head will start rotatingupon the engine starts.1. Feed fuel and chain oil into theirrespective t

US-13PSZ2450SUS ADJUSTING OIL FLOW RATENever fill the oil reservoir nor adjustthe oiler with the engine running. An increase in bar oil flow rate wil

Maintenance, replacement, or repair of the emission control device and systems may be performed by anynon-road engine repair establishment or individu

US-15PSZ2450SUS SAW CHAIN It is very important for smooth andsafe operation to keep the cuttersalways sharp. Your cutters need to be sharpened when:

US-16PSZ2450S9. MaintenanceMA15(1)(2)MA14TIGHTENING TORQUE: 87–121 (in-lbs)(9.8–13.7 N.m.) MUFFLER• Inspect periodically, the muffler forloose fasten

US-17PSZ2450SUSCase 1. Starting failure CHECK PROBABLE CAUSES ACTIONfuel tank ➞ incorrect fuel ➞ drain it and with correct fuelfuel filter ➞ fuel filt

US-18PSZ2450SThe EPA (U.S. Environmental Protection Agency), CARB (California Air Resources Board), EnvironmentCanada and RedMax are pleased to explai

US-19PSZ2450SUSwarranty is warranted for the remaining warranty period. Any warranted part that is scheduled only for regularinspection in the mainten

US-2PSZ2450S1. Parts location...32. Specifications ...

US-3PSZ2450SUS1. Parts location(1) Primer pump(2) Air cleaner cover(3) Choke lever(4) Fuel tank(5) Starter knob(6) Spark arrester(7) Gear case(8) Chai

US-4PSZ2450S3. Warning labels on the machineFor safe operation and maintenance, symbols arecarved in relief on the machine. According to theseindicati

US-5PSZ2450SUS1. Read this manual carefully until youcompletely understand and follow allsafety and operating instructions. 2. Keep this manual handy

US-6PSZ2450Sbetween each person sufficient to ensuresafety.3. Check the condition of working area toavoid any accident by hitting hiddenobstacles such

US-7PSZ2450SUS5. For safe operationhave been certified by RedMax for usewith the RedMax product.4. In the event that any part must be replacedor any m

US-8PSZ2450S5. For safe operation• Never use a cracked or warped guidebar: replace it with a serviceable oneand make sure it fits properly. • If a saw

US-9PSZ2450SUS6. Set up MOUNTING ENGINE (SE1)1. Push the driveshaft housing toward theclutch housing and rotate it by hand tocheck that the driveshaf