RedMax GZ3500T Bedienungsanleitung PDF herunterladen (Seite 8)

GZ3500T

US-8

Tensioner screw

Loosen

Tighten

Chain tensioner

nut

Chain cover

Tighten

Open the box and install the guide bar and the saw

chain on the power unit as follows:

The saw chain has very sharp edges. Use thick pro-

tective gloves for safety.

1. Pull the hand guard towards the front handle to check

that the chain brake is not engaged.

2. Loosen the nuts and remove the chain cover.

3. Mount the guide bar then fit the saw chain around

the bar and sprocket.

NOTE

Pay attention to the correct direction of the saw chain.

4. Fit the chain tensioner nut into the lower hole of the

guide bar, then install the chain cover, and fasten

the mounting nut finger tight.

5. While holding up the tip of the bar, adjust the chain

tension by turning the tensioner screw until the tie

straps of chain just touch the bottom side of the bar

rail.

6. Tighten the nuts securely with the bar tip held up

(11.8-14.7 N.m./120-150 kg-cm). Then check the

chain for smooth rotation and proper tension while

moving it by hand. If necessary, readjust with the

chain cover loose.

7. Tighten the tensioner screw.

A new chain will stretch in its length in the beginning of

use. Check and readjust the tension frequently as a loose

chain can easily derail or cause rapid wear of itself and

the guide bar.

Moving direction

Bar protector

Guide bar

Saw chain

Plug wrench

Screwdriver for

carburetor adjustment

A standard saw unit package contains the items as illustrated.

WARNING

Bar protector

Guide bar

Saw chain

Plug wrench

Screwdriver for

carburetor adjustment

Power unit

5. Installing Guide Bar and Saw Chain

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

RedMax GZ3500T Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kraftkettensägen RedMax GZ3500T